HP OfficeConnect Router Series Bedienungsanleitung PDF herunterladen (Seite 19)

SETTING UP YOUR COMPUTERS

The OfficeConnect Secure Router has the ability to dynamically

allocate network addresses to the computers on your network,

using DHCP. However, your computers need to be configured

correctly for this to take place. To change the configuration of

your computers to allow this, follow the instructions in this

chapter.

If your computers are configured with static addresses (also

known as fixed addresses) and you do not wish to change this,

then you should use the Discovery program on the Router

CD-ROM to detect and configure your Router. Refer to “

Using

Discovery” on page 79 for information on using the Discovery

program.

Obtaining an IP Address Automatically

Windows 2000, XP, 2003 Server

If you are using Windows 2000, Windows XP or Windows 2003

Server, use the following procedure to change your TCP/IP

settings (Windows XP and 2003 Server specific instructions in

brackets):

1 From the Windows Start Menu, select Settings > Control Panel

(select Control Panel directly from the Start menu in Windows

XP)

2 Double click on Network and Dial-Up Connections (Network and

Internet Connections). For XP and 2003 Server only — click on

Network Connections.

3 Double click on Local Area Connection.

4 Click on Properties.

5 A screen similar to Figure 7 should be displayed. Select Internet

Protocol (TCP/IP) and click on Properties.

Figure 7 Local Area Connection Properties

6 Ensure that the options Obtain an IP Address automatically, and

Obtain DNS server address automatically are both selected as

shown in Figure 8

. Click OK.

dua08609-5aaa01.book Page 19 Thursday, September 11, 2003 12:15 PM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 111 112

Keine Kommentare

HP OfficeConnect Router Series Bedienungsanleitung Seite 19