HP D5400 Bedienungsanleitung PDF herunterladen (Seite 167)

b. Place the ink cartridge on a sheet of paper with the ink opening pointing up.

c. Repeat steps a and b for each ink cartridge.

5. For each ink cartridge, wipe the sensor window with a dry swab or lint-free cloth.

The sensor window is an area of clear plastic near the copper or gold-colored

metal contacts on the bottom of the ink cartridge. Try not to touch the metal

contacts.

6. Install each ink cartridge in its slot. Press it down until the tab snaps into place.

Match the color and icon on each ink cartridge label to the color and icon on the

slot for that ink cartridge.

7. Close the ink cartridge access door, and check if the error has been resolved.

8. If you still receive the error message, turn the product off, and then on again.

Cause: Ink might have built up on the ink cartridge sensor window and it needed to

be cleaned

If this did not solve the issue, try the next solution.

Solution 3: Replace the ink cartridge

Solution: Replace the indicated ink cartridge.

Chapter 11

166 Troubleshooting

Troubleshooting

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 220 221

Keine Kommentare

HP D5400 Bedienungsanleitung Seite 167