HP LH4r - NetServer - 256 MB RAM Technical Information Seite 25
- Seite / 158
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
24
xSeries 220 Internal SCSI Cabling
Non-Hot-Swap
Models
xSeries 220 nonhot-swap models are cabled internally with a five-drop, 16-bit wide LVD SCSI cable with a built-in multi-mode active terminator on one end of the
cable. The other end of the cable is attached to the internal 68-pin connector of the integrated Ultra160 SCSI controller. SCSI devices can be connected to any of the
five cable connectors. If 8-bit (narrow) devices are to be installed, a 68- to 50-pin converter (32G3925) is required for each narrow device.
Hot-Swap Models
xSeries 220 hot-swap models are cabled internally with a two-drop, 16-bit wide LVD SCSI cable. One end is connected to the internal 68-pin connector of the
integrated Ultra160 SCSI controller. The first drop is designed to support a SCSI device in the 3.5-inch non-hot-swap bay, while the second drop is connected to the
hot-swap SCSI backplane.The SCSI backplane provides termination for the SCSI bus.
Other Configuration Alternatives
In the case where a RAID controller is used to support internal drives in a xSeries 220, the standard cable is moved from the onboard controller to the RAID adapter.
To connect a tape drive to the onboard or other supported SCSI controller, the two-drop cable from Media Bay Tray and LVD Cable Kit (P/N 10K2340) must be used.
External SCSI support can be obtained by installing an optional SCSI adapter or RAID controller and using appropriate external SCSI cabling.
External Storage Expansion Units
3
Form Factor
35311RU EXP300 Storage Expansion Unit
4
Rack (3U)
09N7296 EXP300 Rack-to-Tower Conversion Kit -
1. Nonhot-swap HDDs are supported in bays four through seven of nonhot swap models and in bay four of hot-swap
models.
2. Hot-swap HDDs are supported in bays five through seven of hot-swap models. Bay four supports nonhot-swap
HDDs only.
3. Not supported by the onboard SCSI controller. Select an optional SCSI controller then refer to Appendix D: Cables
- Storage Units - Controllers to confirm the controller supports the desired External Storage Expansion Unit and to
select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
4. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each with its
own power cord. To convert an EXP300 to a tower form factor, EXP300 Rack-to-Tower Conversion Kit (P/N 09N7296)
is required.
Bay Form
Factor
Height Front
Access
Usage
1
133mm
(5.25in)
HH yes
IDE CD-
ROM
2
133mm
(5.25in)
HH yes open
1
3
89mm
(3.5in)
SL yes Floppy
4
89mm
(3.5in)
SL yes open
5 ... 7
89mm
(3.5in)
SL
2
yes open
1. This bay does not support HDD options. It can be used for
removable media devices such as tape drives.
2. These bays will be configured as hot-swap bays on models -2AX,
-3AX, -4AX and -5AX.
Bay 4
CD-ROM
Bay 2
Diskette
Bay 5
Bay 6
Bay 7
- United States 1
- April/May 2001 1
- Ta ble of Contents 2
- Information Sources 3
- Additional URLs 4
- Server Product Positioning 5
- PRODUCT POSITIONING 6
- Application/ 7
- Expectation of 7
- Maximum # of Users 7
- SERVER SELECTION 10
- GUIDANCE 10
- IBM xSeries 130/135 11
- 0.2GB unless otherwise noted 12
- IBM XSERIES 130 / 135 14
- IBM xSeries 200 15
- IBM XSERIES 200 22
- IBM xSeries 220 23
- Application Server 29
- IBM XSERIES 220 30
- Tower Model View 33
- Monitors 35
- High Availability File Server 45
- IBM XSERIES 240 / 46
- NETFINITY 5600 46
- IBM xSeries 250 47
- IBM XSERIES 250 56
- IBM xSeries 330 57
- IBM XSERIES 330 64
- IBM XSERIES 340 72
- NETFINITY 4500R 72
- IBM XSERIES 350 80
- AND NETFINITY 6000R 80
- Memory Card A- Std 82
- Memory Card B- Optional 82
- Std RDIMM 82
- IBM XSERIES 370 / 86
- NETFINITY 8500R 86
- Host Attach 86
- Stack Options 90
- IBM Netfinity 7100 91
- Server Consolidation 99
- IBM NETFINITY 7100 100
- IBM Netfinity 7600 101
- Keyboard and Mouse 107
- Part Number Description 107
- Conversion Kits 107
- Rack and NetBAY 107
- IBM STORAGE 110
- EXPANSION UNIT 110
- FASTT200 STORAGE SERVER 112
- IBM EXP300 (35311RU) 113
- Cables and Controllers: 114
- EXP300 Sample Configurations 115
- IBM FAStT EXP500 (35601RU) 116
- External: Fibre Channel 117
- Internal: Fibre Channel 117
- Auto Termination 117
- Fibre Array Solutions 118
- 119
- Netfinity FAStT Host 120
- Adapter 120
- NETFINITY FIBRE 122
- ARRAY SOLUTIONS 122
- Netfinity Rack (P/N 9306900) 124
- HIGH AVAILABILITY 128
- CLUSTERING 128
- IBM Datacenter Solutions 130
- Datacenter Solutions 131
- Stackable Enclosures 136
- Rack Cabinet and Options 138
- Switch Arrangements 142
- Slide-Out and Flip-Up 142
- Tape D rives 143
- Associated Options 143
- Tape Autoloaders 143
- External Tape Enclosures 143
- External Tape Libraries 143
- TAPE ATTRIBUTE S 144
- DLT Tape Libraries 144
- 3600 Series Tape Libraries 144
- Magstar Tape Systems 144
- Magstar MP Media 145
- Appendix D: SCSI Cables — 149
- Storage Units — Controllers 149
- Appendix E: IBM Serial I/O 150
- Updated 2/16/01 152
- IBM Server Peripherals 153
- IBM SERVICEPAC 154
- Important Notes 157
Verwandte Produkte und Handbücher für PC / Workstation Barebones HP LH4r - NetServer - 256 MB RAM
PC / Workstation Barebones HP Pre3 Betriebsanweisung
(234 Seiten)
(234 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.121 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern