HP LH4r - NetServer - 256 MB RAM Technical Information PDF herunterladen (Seite 18)

For the latest product & technical information, refer to the Information Sources on pages 2 and 3.

Updated 03/22/01

IBM XSERIES 200

xSeries 200 Internal SCSI Cabling

EIDE Models

In xSeries 200 models using the EIDE interface for storage device attachment, a two-drop cable is used to attach the standard15GB EIDE HDD to one of the EIDE

connectors. A second EIDE controller provides the interface for the IDE CD-ROM drive. A two-drop cable connects the IDE controller to the IDE CD-ROM. Up to two

additional EIDE or IDE devices can be installed (one off of each controller).

SCSI Models

xSeries 200 models with a SCSI adapter are cabled internally with a five-drop, 16-bit wide LVD SCSI cable with a built-in multi-mode active terminator at one end of

the cable. The other end of the cable is attached to the internal 68-pin connector of the standard Ultra160 SCSI adapter. SCSI devices can be connected to any of

the five cable connectors. If 8-bit (narrow) devices are to be installed, a 68- to 50-pin converter (32G3925) is required for each narrow device.

Other Configuration Alternatives

In the case where a RAID controller is used to support internal drives in a xSeries 200, the standard cable is moved from the onboard controller to the RAID adapter.

To connect a tape drive to the onboard or other supported SCSI controller, use the 16-bit multi-mode terminated, two-drop SCSI cable included with optional Media

Bay Tray and LVD Cable Kit (P/N 10K2340).

External SCSI support can be obtained by installing an optional SCSI adapter or RAID controller and using appropriate external SCSI cabling.

xSeries 200 I/O Options

Part

Number

Description Adapter

Length

PCI

Support

Slots

Supported

Storage Controllers

2, 3

37L6091 ServeRAID-4L Ultra160 SCSI Controller

Full 32/64-bit 2 ... 5

37L6080 ServeRAID-4M Ultra160 SCSI Controller

Full 32/64-bit 2 ... 5

19K4646 PCI Wide Ultra160 SCSI Adapter

Half 32-bit 2 ... 5

02K3454 PCI Fast/Wide Ultra SCSI Adapter Half 32-bit 2 ... 5

Networking

Ethernet

09N9901 10/100 EtherLink Server Adapter by 3Com Half 32-bit 1 ... 5

19K4401 Netfinity Gigabit Ethernet Adapter (copper) Half 32/64-bit 1 ... 5

34L4601 Netfinity 10/100 Ethernet Security Adapter Half 32/64-bit 1 ... 5

06P3601 10/100 Ethernet Server Adapter Half 32-bit 1 ... 5

06P3701 Gigabit Ethernet SX Server Adapter (fiber) Half 32/64-bit 1 ... 5

Token Ring

34L0701 Token-Ring 16/4 PCI Adapter 2 with Wake on LAN Half 32-bit 1 ... 5

34L5001 16/4 Token-Ring PCI Management Adapter Half 32-bit 1 ... 5

34L5201 High-Speed 100/16/4 Token-Ring PCI Management Adapter Half 32-bit 1 ... 5

Communications

33L4618 PCI V.90 56 Data/Fax Modem Half 32-bit 2 ... 5

37L14xx Serial I/O SST 8, 16 and 128 Port Adapters

Half 32-bit 2 ... 5

1. The xSeries 200 has five full-length, 33MHz PCI expansion slots. The number of available slots is model specific.

2. Some models of the xSeries 200 include a single channel Ultra160 SCSI Adapter with a five-drop multi-mode terminated LVD SCSI Cable. All other models include dual-channel EIDE

controllers and require an optional SCSI adapter for SCSI functionality. See At-A-Glance for model attributes

3. Storage controllers are supported in slots two through five only. Slots two and four and slots three and five are paired so that they support only the same type of adapter, e.g., if a storage

controller is installed in slot two, only another storage controller can be installed in slot four. Thus, a networking adapter cannot be installed in slot four when a storage controller is installed in

slot two. (Slot one is next to the AGP video adapter, and slot five is the farthest from the processors.)

4. ServeRAID-4L Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides a single channel, 16MB of ECC cache and either one internal or one external Ultra160

connection. External connector is 0.8mm VHDCI.

5. ServeRAID-4M Ultra160 SCSI Controller is powered by a 100MHz Intel i960 processor and provides two channels, 64MB of battery-backed ECC cache and two external 0.8mm VHDCI

Ultra160 connectors.

6. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and a five-drop multi-mode terminated LVD SCSI cable and one external connector

with a 0.8mm VHDCI connector. Only one of the two connectors may be utilized.

7. xSeries 200 includes an integrated full-duplex, 10/100Mbps Ethernet controller. Networking adapters are supported in slots one through five; Slots two and four and slots three and five are

paired so that they support only the same type of adapter, e.g., if a networking adapter is installed in slot three, only another networking adapter can be installed in slot five. Thus, a storage

controller cannot be installed in slot five when a networking adapter is installed in slot three.

8. Wake on LAN™ is supported for networking adapters designed with this function when installed in slots one through five (refer to limitation explained in footnotes three and seven).

9. xSeries 200 includes two USB ports, two high-speed serial/asynchronous ports (NS16550A software compatible) and one high-speed parallel port supporting devices using

SSP/EPP/ECP protocols adhering to the IEEE 1284 Standard.7.

10. See Appendix E for details on Serial I/O options and configuration limitations.

Slot 4- 33MHz, 32-bit, 5V or Universal

Slot 5- 33MHz, 32-bit, 5V or Universal

All Slots-Full Length

Slot 1- 33MHz, 32-bit, 5V or Universal

Slot 2- 33MHz, 32-bit, 5V or Universal

Slot 3- 33MHz, 32-bit, 5V or Universal

External Connector Access

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 157 158

Kommentare zu diesen Handbüchern

Keine Kommentare

HP LH4r - NetServer - 256 MB RAM Technical Information Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für PC / Workstation Barebones HP LH4r - NetServer - 256 MB RAM