HP Moonshot-45XGc Betriebsanweisung PDF herunterladen (Seite 94)

Views

Layer 2 Ethernet interface view, Layer 3 Ethernet interface view

Predefined user roles

network-admin

Parameters

queue-id: Specifies a queue by its ID. The value is an integer in the range of 0 to 7 or a keyword listed

in Table 33.

sp: As

signs a queue to the SP group, which uses the SP queue scheduling algorithm.

Usage guidelines

You must use the qos wfq command to enable WFQ first before you configure this command.

With this SP+WFQ queuing method, the system schedules traffic as follows:

1. The system schedules the traffic conforming to the minimum guaranteed bandwidth in each WFQ

group and schedules the traffic of the two WFQ groups in the ratio of 1:1 in a round robin manner.

2. The system uses SP to schedule queues in the SP group.

3. If there is remaining bandwidth, the system schedules the traffic of queues in each WFQ group

based on their weights and schedules the traffic of the two WFQ groups in the ratio of 1:1 ratio in

a round robin manner.

Examples

# Enable weight-based WFQ on FortyGigE 1/1/1, and assign queue 0 to the SP group.

<Sysname> system-view

[Sysname] interface FortyGigE 1/1/1

[Sysname-FortyGigE1/1/1] qos wfq weight

[Sysname-FortyGigE1/1/1] qos wfq 0 group sp

Related commands

• display qos queue wfq interface

• qos bandwidth queue

• qos wfq

Queue scheduling profile commands

bandwidth

Use bandwidth to configure the minimum guaranteed bandwidth for a WFQ queue.

Use undo bandwidth to restore the default.

Syntax

bandwidth queue queue-id min bandwidth-value

undo bandwidth queue queue-id

Default

The minimum guaranteed bandwidth of a WFQ queue is 64 kbps.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 123 124

Keine Kommentare

HP Moonshot-45XGc Betriebsanweisung Seite 94