HP Moonshot-45XGc Betriebsanweisung PDF herunterladen (Seite 118)

113

Usage guidelines

After you configure the total shared-area ratio, the remaining buffer space is automatically assigned to

the fixed area.

Examples

# Configure the shared area to use 65% space of cell resources in the egress buffer of IRF member device

<Sysname> system-view

[Sysname] buffer egress slot 2 cell total-shared ratio 65

burst-mode enable

Use burst-mode enable to enable the Burst function.

Use undo burst-mode enable to disable the Burst function.

Syntax

burst-mode enable

undo burst-mode enable

Default

The Burst function is disabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

The Burst function is especially useful for reducing packet losses under circumstances such as the

following:

• Broadcast or multicast traffic is intensive, resulting in bursts of traffic.

• Traffic enters a device from a high-speed interface and goes out of a low-speed interface.

• Traffic enters a device from multiple same-rate interfaces and goes out of an interface with the same

rate.

Examples

# Enable the Burst function.

<Sysname> system-view

[Sysname] burst-mode enable

display buffer

Use display buffer to display buffer size settings.

Syntax

display buffer [ slot slot-number ] [ queue [ queue-id ] ]

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 124

Keine Kommentare

HP Moonshot-45XGc Betriebsanweisung Seite 118