HP E5000 Betriebsanweisung PDF herunterladen (Seite 125)

6. The original capacitor pack is connected to a cache module, so observe the cache module

LEDs:

• If the amber cache LED is solid, data transfer to the flash device on the cache is in progress.

Do not remove the cache until the amber LED is off, and then continue with the next step.

• If the amber cache LED is not lit, proceed to the next step.

7. Open the ejector latches (1, Figure 145 (page 125)) on each side of the cache module slot.

Typically, opening the ejector latches ejects the cache module automatically. If the module

does not eject automatically after you open the ejector latches, remove the cache module (2)

by grasping only the edges.

Figure 145 Removing the cache module

8. Remove the cache module (1, Figure 146 (page 125)) from the controller card (3) and the

capacitor pack (2) from the server blade.

Figure 146 Removing the cache module and the capacitor pack

Removing and replacing the 1210m controller board components 125

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 198 199

Keine Kommentare

HP E5000 Betriebsanweisung Seite 125