HP 24SII Bedienungsanleitung PDF herunterladen (Seite 133)

5. Hold the memory expansion module in your hand so that the

card edge connector is facing down.

IMPORTANT: On the memory expansion module, Pin 1 is marked.

Pin 1 should be positioned to the left of the unit (with LEDs facing

you).

WARNING: If module is plugged in backwards, it will be damaged and

become inoperable.

6. Line up the connector of the memory expansion module with

the socket. Push down on the memory expansion module until

it is firmly seated in the socket.

7. If a memory expansion module needs to be removed, pull

straight up and away from the socket.

8. Once memory expansion has been completed, replace the

cover of the unit and the 4 phillips-head screws that hold it.

Apply power to the unit. The upgrade is now complete.

9. To verify memory upgrade, enter the configuration mode (see

Section 8

). The installed memory will be displayed in the main

configuration menu.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 167 168

Keine Kommentare

HP 24SII Bedienungsanleitung Seite 133