HP 10BASE-T Betriebsanweisung PDF herunterladen (Seite 10)

1-4

Switching Hub Features

Front of the Hub

Switching Hub Features

Hub Identification

Below the AUI/Xcvr (Transceiver) port is a label with the Hub Identification

number and serial number. The Hub Identification number is displayed in the

ASCII console and HP AdvanceStack Assistant to identify the hub in the stack.

The format is:

123-1234567

The Hub Identification number is not the MAC address. The Switching Hub

does not have a MAC address because it cannot be managed without a

Management Module. See the Management Module manual for information on

the MAC addresses for a stack.

Coexistence of Switching Hubs with Other Ethernet

Hubs

If you have an existing stack of hubs, connect a network cable from one stack

to the other as shown on the topology card included with the hubs (5182-9815).

Resetting the Hubs

You can reset the hub by unplugging and plugging back in the power cord;

each hub does not have a reset button. By reinserting the power cord, the hub

performs the power-on self-test. No configuration is changed.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Keine Kommentare

HP 10BASE-T Betriebsanweisung Seite 10