HP Z200 Spezifikationen PDF herunterladen (Seite 133)

CPU

This section describes how to remove and install a CPU.

Removing a CPU

To remove a CPU:

1. Prepare the computer for servicing by following the

Predisassembly procedures on page 68.

CAUTION: Failure to follow the predisassembly procedures can result in equipment damage or

data loss.

2. Remove the access panel (see Removing the access panel on page 71).

3. Remove the CPU heatsink (see

Removing the CPU heatsink on page 118).

4. Raise the CPU socket lever (1) and open the cover (2) as shown in the following figure (fan

assembly not shown).

Figure 5-58 Removing a CPU

CAUTION: Do not touch the CPU socket contacts or the gold pads underneath the CPU. Use

extreme care and handle the CPU only by the edges.

5. Pull the CPU straight out of the socket (3), and store the CPU in a static free container in a safe

place where it cannot be damaged

ENWW Removing and installing components 121

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 198 199

Keine Kommentare

HP Z200 Spezifikationen Seite 133