HP Z600 Spezifikationen PDF herunterladen (Seite 186)

Accessing HP Vision Diagnostics on the workstation

The following procedures describe how to access the HP Vision Diagnostics utilities that are included

in the workstation software.

Creating and using a bootable USB key

This section describes how to use a USB key to access the HP Vision Diagnostics.

NOTE: Using a USB key is the most convenient method to access the HP Vision Diagnostics.

1. In the C:\VisionDiagnostics\ directory, double-click on VisionDiagUSB.exe. A setup menu appears.

2. Follow the setup prompts to create a bootable ISO image of the diagnostic utilities on a USB key.

3. Turn off the workstation and restart it with the USB key installed. The workstation will boot to the

USB key and initiate the HP Vision Diagnostics utility.

4. Follow the HP Vision Field Diagnostic prompts to troubleshoot the workstation.

Creating and using a bootable DVD

This section describes how to use a DVD to access the HP Vision Diagnostics.

1. In the C:\VisionDiagnostics\ directory, double-click on the VisionDiagISO.exe file. A setup menu

appears.

2. Follow the setup prompts to create a bootable ISO image of the diagnostic utilities on a DVD.

3. Enable the workstation to boot from DVD.

4. Turn off the workstation and restart it with the DVD installed in the optical drive. The workstation

will boot to the DVD and initiate the HP Vision Diagnostics utility.

5. Follow the HP Vision Field Diagnostic prompts to troubleshoot the workstation.

Using the HP Memory Test utility

This section describes how to access the HP Memory Test utility.

NOTE: The HP Memory Test is a comprehensive memory diagnostic utility that is run as a stand-alone

application, outside of HP Vision Diagnostics.

If the workstation is booted from a CD, a separate boot CD will be required to use the memory diagnostic.

Hence, HP recommends that a USB key be used to boot the diagnostic utilities. It is faster than using

a CD, and it accommodates both Memory and Vision diagnostics.

1. In the C:\VisionDiagnostics\ directory, double-click on the MemoryDiagISO.exe file. A setup menu

appears.

2. Follow the setup prompts to create a bootable ISO image of the memory diagnostic utility on a

DVD.

3. Turn off the workstation and restart it with the DVD installed in the optical drive. The workstation

will boot to the DVD and initiate the memory diagnostic utility.

4. Follow the diagnostic prompts to troubleshoot workstation memory.

174 Chapter 6 Diagnostics and troubleshooting ENWW

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 237 238

Keine Kommentare

HP Z600 Spezifikationen Seite 186