HP Web Jetadmin Software Bedienungsanleitung PDF herunterladen (Seite 27)

Security

802.1X Authentication

Use this option to specify the 802.1X authentication settings on the HP Jetdirect print server required for client authentication on the network. You can

also use this option to reset the 802.1X authentication settings to the factory-default values. For most 802.1X networks, the infrastructure components,

such as LAN switches, must use 802.1X protocols to control a port's access to the network. If these ports do not allow partial or guest access, you might

need to configure the print server with the 802.1X parameters prior to connecting to the network. To configure the initial 802.1X settings before

connecting to the network, you can use an isolated LAN or a direct computer connection using a crossover cable. The supported 802.1X authentication

protocols and associated configuration depend on the print server model and firmware version.

Access Control for Device

Functions

Use this option to restrict access to various device functions, such as administration menus, send to email, and more. The device can be set up to

require the user to log in via a local PIN, a Windows password, LDAP login, Smart Card, and more, for any or all device functions. Custom permission

sets can be created with specific permissions for each function, or the standard Guest and User accounts can be used to restrict access. A signed-in

user can never be restricted more than a guest, so restricting access to a function for one or more users will cause that function to be restricted for the

Guest as well.

Access Control Level for

Device Functions

Use this configuration option to set the access control levels for the device. A different authentication method and security level can be assigned to each

device function. You can reduce costs and increase security by only allowing users access to the minimum set of device functions necessary for your

organization's operational needs.

Access Control List

This feature lets you determine the access control list (ACL), which is used to specify the IP addresses on your network that are allowed access to the

device. The ACL is normally used for security purposes and supports up to 10 entries. The device blocks communications from all other addresses. If the

list is empty, any system is allowed access. By default, host systems with HTTP connections (such as web browser or IPP connections) are allowed

access regardless of ACL entries. This allows hosts to access the device when proxy servers or Network Address Translators (NATs) are used.

However, unfiltered access by HTTP hosts may be disabled by clearing the Check ACL for HTTP checkbox.

Authenticate LDAP and

Kerberos Without Email

Use this option to enable or disable the Kerberos and LDAP Authentication functions that allow users to sign in to the servers even if they do not have an

email address.

Authentication Manager

This option enables you to set the authentication method to be used for accessing the device and various functions on the device. The authentication

methods are User Pin, Group 1 PIN, Group 2 Pin, LDAP, Kerberos, and HP Digital Send Service. The device functions include Walk-up (control panel

access), Copy, Send E-mail, Send Fax, Send to Network folder, DSS Secondary E-mail, and DSS Workflow. If another device function becomes

available through a third-party device or software, it appears in this list and can have an authentication method enabled for it.

Automatic Update

Use this option to enable or disable Automatic Update in the device control panel. This is a one-time setting, and it can be configured after a cold reset.

Bootloader Password

This option lets you configure a password on the bootloader screens for a device. This keeps the user from making any changes when the device first

boots up. The bootloader PIN keeps users from changing the bootloader password. You can enter a new 4-digit PIN (or enter the existing 4-digit PIN if it

had been set previously) and then enter the bootloader password itself.

Color Access Control

This option lets you specify whether to allow jobs to print in color. The Enable Color setting allows all color jobs to print in color. The Color if Allowed

setting requires the device to check the permissions defined for the user and the application to determine whether each job will be printed in color or not.

If either the user or the application has "black-only" permission, the job is printed without color. The Disable Color setting forces all color jobs to print in

black.

Color Access Control Level

Use this option to specify whether to allow jobs to print in color. The On setting allows all color jobs to print in color. The Custom access control setting

requires the device to check the permissions defined for the user and the application to determine whether each job will be printed in color or not. If either

the user or the application has “black-only” permission, then the job will be printed without color. The Off setting will result in all color jobs printing in

black.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare

HP Web Jetadmin Software Bedienungsanleitung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Laser- / LED-Drucker HP Web Jetadmin Software