HP ProDesk 600 G3 Base Model Small Form Factor PC Bedienungsanleitung Seite 51

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 150
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 50
6. To install an M.2 SSD card, slide the pins on the card into the system board connector while holding the
card at approximately a 30° angle (1). Press the other end of the card down (2), and then secure the card
with the screw (3).
7. Replace the drive cage.
8. Reconnect the power and data cables to all drives in the drive cage and reassemble the computer.
Drives 43
Seitenansicht 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 149 150

Kommentare zu diesen Handbüchern

Keine Kommentare