HP EliteBook 8740W Spezifikationen PDF herunterladen (Seite 63)

6. Remove the three Phillips PM2.0×4.0 screws (1) that secure the optical drive bracket to the

optical drive.

7. Remove the optical drive bracket (2).

Reverse this procedure to reassemble and install the optical drive.

Secondary hard drive

NOTE: The hard drive bracket is included in the Hard Drive Hardware Kit, spare part number

630891-001.

Description Spare part number

6.35-cm (2.50-in) 640-GB, 7200-rpm hard drive 621046-001

6.35-cm (2.50-in) 500-GB, 7200-rpm hard drive 634919-001

6.35-cm (2.50-in) 320-GB, 7200-rpm hard drive 627731-001

6.35-cm (2.50-in) 320-GB, 7200-rpm SED (Self-Encrypting Drive) 626978-001

6.35-cm (2.50-in) 250-GB, 7200-rpm hard drive 538972-001

Hard drive carrier 613682-001

Before removing the secondary hard drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 47).

Remove the secondary hard drive:

1. Position the computer with the left side toward you.

2. Remove the four Mylar screw covers (1) that conceal the secondary hard drive carrier retention

screws.

3. Remove the four Phillips PM3.0×3.0 screws (2) that secure the secondary hard drive carrier to

the computer.

Component replacement procedures 55

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 167 168

Keine Kommentare

HP EliteBook 8740W Spezifikationen Seite 63