
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 47), and then remove the following components:
a. Primary hard drive (see
Primary hard drive on page 49)
b. Optical drive (see
Optical drive on page 54) or secondary hard drive (see Secondary hard
drive on page 55)
c. Keyboard (see
Keyboard on page 63)
d. Switch cover (see
Switch cover on page 67)
e. Graphics board heat sink (see
Graphics board heat sink on page 69)
f. Display assembly (see
Display assembly on page 76)
g. Top cover (see
Top cover on page 86)
h. Audio board (see
Audio board on page 90)
i. Speaker (see
Speaker assembly on page 91)
j. USB board (see
USB board on page 96)
When replacing the system board, be sure that the following additional components are removed
from the defective system board and installed on the replacement system board:
●
SIM (see
SIM on page 48)
●
WLAN module (see
WLAN module on page 57)
●
WWAN module (see
WWAN module on page 59)
●
Expansion memory modules (see
Expansion memory module on page 60)
●
RTC battery (see
RTC battery on page 62)
●
Primary memory modules (see
Primary memory module on page 66)
●
Graphics board (see
Graphics board on page 72)
●
Processor heat sink (see
Processor heat sink on page 73)
●
Processor (see
Processor on page 75)
●
Bluetooth module cable (see
Bluetooth module cable on page 89)
●
Audio cable (see
Audio cable on page 93)
●
Modem module (see
Modem module on page 94)
Remove the system board:
1. Disconnect the network cable (1) from the system board.
2. Press in on the ExpressCard slot bezel (2) to release it from the ExpressCard slot.
3. Remove the ExpressCard slot bezel (3) from the ExpressCard slot.
Component replacement procedures 99
Kommentare zu diesen Handbüchern