Hp TC2120 Bedienungsanleitung PDF herunterladen (Seite 110)

104

Chapter 7 Replacing Parts

System Board

Removing the System Board

1. If the server is operating, power down the server.

Refer to Chapter 1‚ Controls and Indicators for instructions.

2. Disconnect the power cord and any external cables.

If necessary, label each one to expedite re-assembly.

3. Remove the left side cover.

4. Lay the server on its side (components showing).

5. Remove any accessory boards mounted on the system board.

6. Disconnect all cables connected to the system board.

If necessary, label each one to expedite re-assembly.

7. Remove DIMMs, heat sink-cooling fan and the processor, placing the components on an anti-static pad.

8. Remove all the screws securing the system board to the chassis.

9. Remove the old system board by carefully disengaging the rear connectors and then carefully lifting it out

and away from the chassis.

10. Place the system board on an anti-static pad and record all jumper connections.

11. Place the system board in an anti-static container.

Figure 7-20. Removing and Replacing the System Board

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 124 125

Keine Kommentare

Hp TC2120 Bedienungsanleitung Seite 110