Hp ProLiant ML10 Server Bedienungsanleitung PDF herunterladen (Seite 40)

Hardware options installation 40

Expansion board options

1. Press the Power On/Standby button.

The server powers down and enters standby mode. The system power LED changes from green to

amber. Power is still applied to the server.

2. Disconnect the power cord from the power source.

3. Disconnect the power cord from the server.

4. Place the server on its side.

5. Remove the access panel (on page 12).

6. Remove the expansion slot cover retainer.

7. Remove the expansion slot cover.

a. If installing the expansion board in PCIe slots 1 or 3, push and remove the slot cover attached to the

chassis.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Keine Kommentare

Hp ProLiant ML10 Server Bedienungsanleitung Seite 40