Hp ProLiant ML10 Server Bedienungsanleitung PDF herunterladen (Seite 14)

Operations 14

The server powers down and enters standby mode. The system power LED changes from green to

amber. Power is still applied to the server.

3. Disconnect the power cord from the power source.

4. Disconnect the power cord from the server.

5. Remove the access panel (on page 12).

6. Remove the front bezel.

Install the front bezel

1. Insert the tabs on the front bezel into the slots on the front chassis.

2. Close the front bezel.

Install the access panel

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 75 76

Keine Kommentare

Hp ProLiant ML10 Server Bedienungsanleitung Seite 14