Hp ProLiant DL380e Gen8 Server Bedienungsanleitung PDF herunterladen (Seite 23)

Operations 23

Place the server on a sturdy, level surface.

Remove the security bezel (optional)

To access the front panel components, unlock and then remove the security bezel.

Remove the access panel

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION: Do not operate the server for long periods with the access panel open or removed.

Operating the server in this manner results in improper airflow and improper cooling that can

lead to thermal damage.

1. Power down the server (on page 20).

2. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Do one of the following:

o Extend the server from the rack (on page 20).

o Remove the server from the rack (on page 22).

4. Open the access panel latch, slide the access panel to the rear of the chassis, and then remove the

access panel.

If the access panel latch is locked, use a T-15 Torx screwdriver to unlock the latch.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 141 142

Keine Kommentare

Hp ProLiant DL380e Gen8 Server Bedienungsanleitung Seite 23