Hp ProLiant DL365 G5 Server Bedienungsanleitung PDF herunterladen (Seite 42)

Hardware options installation 42

Install the hot-plug hard drive.

4. Determine the status of the hot-plug hard drive by observing the drive LEDs ("SAS and SATA hard

drive LED combinations" on page 16).

5. Resume normal server operations.

Multibay device options

Several multibay devices can be installed in the server. For a list of supported multibay devices, refer to

the QuickSpecs on the HP website (http://www.hp.com/support

To install the component:

1. Power down the server (on page 18).

NOTE: Access to the ejector button is intentionally restricted. To eject the optical device, push

the ejector button with a small flat object such as a key or pen.

2. Push the multibay drive ejector button to eject the device or blank.

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless

all bays are populated with either a component or a blank.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 117 118

Keine Kommentare

Hp ProLiant DL365 G5 Server Bedienungsanleitung Seite 42