Hp ProLiant BL465c Gen8 Server Blade Bedienungsanleitung PDF herunterladen (Seite 46)

Hardware options installation 46

Install the TPM board. Press down on the connector to seat the board ("System board components" on

page 8).

8. Install the TPM security rivet by pressing the rivet firmly into the system board.

9. Install the mezzanine assembly.

10. Install the access panel (on page 14).

11. Install the server blade ("Installing a server blade" on page 25).

Retaining the recovery key/password

The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after

BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery

key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of system

integrity.

To help ensure maximum security, observe the following guidelines when retaining the recovery

key/password:

• Always store the recovery key/password in multiple locations.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 88 89

Keine Kommentare

Hp ProLiant BL465c Gen8 Server Blade Bedienungsanleitung Seite 46