Hp ProLiant BL465c Gen8 Server Blade Bedienungsanleitung PDF herunterladen (Seite 44)

Hardware options installation 44

Route the cable between the DIMMs and the heatsinks or heatsink blank. Connect the cable to the

mezzanine option.

o Route the cable along the DIMM baffle and connect the cable to the SAS controller.

7. Install the DIMM baffle (on page 15).

8. Install the access panel (on page 14).

9. Install the server blade ("Installing a server blade" on page 25).

HP Trusted Platform Module option

Use these instructions to install and enable a TPM on a supported server blade. This procedure includes three

sections:

1. Installing the Trusted Platform Module board (on page 45).

2. Retaining the recovery key/password (on page 46).

3. Enabling the Trusted Platform Module (on page 47).

Enabling the TPM requires accessing RBSU ("HP ROM-Based Setup Utility" on page 57). For more

information about RBSU, see the HP website (http://www.hp.com/go/ilomgmtengine/docs).

TPM installation requires the use of drive encryption technology, such as the Microsoft Windows BitLocker

Drive Encryption feature. For more information on BitLocker, see the Microsoft website

(http://www.microsoft.com).

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 88 89

Keine Kommentare

Hp ProLiant BL465c Gen8 Server Blade Bedienungsanleitung Seite 44