Hp ProLiant BL25p Server-Blade Bedienungsanleitung PDF herunterladen (Seite 25)

Hardware Options Installation

In This Section

Processor Option ..........................................................................................................................25

Memory Option ............................................................................................................................29

Hard Drive Option........................................................................................................................32

Fibre Channel Adapter Option .....................................................................................................33

Smart Array 6i Battery-Backed Write Cache Enabler Option......................................................35

Processor Option

Use these instructions to install an AMD Opteron™ processor into a supported

HP ProLiant p-Class server blade.

NOTE: Some server blade models ship with one processor installed.

Use these instructions to install an optional second processor.

WARNING: To reduce the risk of personal injury from hot

surfaces, allow the drives and the internal system components to

cool before touching them.

WARNING: This documentation assumes that the server

blade is in a server blade enclosure and not receiving power from

a diagnostic station. If using a diagnostic station, be sure to

disconnect the server blade from the diagnostic station before

installing internal components.

CAUTION: ESD can damage electronic components. Be sure

that you are properly grounded (earthed) before beginning any

installation procedure.

IMPORTANT: Processor socket 1 must always be populated. If

processor socket 1 is empty, the server blade will not power up.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 117 118

Keine Kommentare

Hp ProLiant BL25p Server-Blade Bedienungsanleitung Seite 25