Hp PCIe IO Accelerators for ProLiant Servers Bedienungsanleitung PDF herunterladen (Seite 62)

VMWare ESX environments 62

$ vihostupdate <conn_options> --install --nosigcheck --bundle=offline-

bundle.zip

7. Restart the ESX host.

8. Exit maintenance mode.

Installing the driver using esxupdate

Before you install a new driver set using esxupdate, you must first remove any entry that begins with

either of the following commands:

• cross_vmware-esx-drivers-block-fio-drive

• cross_vmware-esx-drivers-block-iomemory-vsl

To remove previously installed drivers:

1. Enter the following command to determine the VIB ID of any installed drivers:

esxupdate --vib-view query

Sample output:

cross_vmware-esx-drivers-block-iomemory-vsl_400.2.1.0.4872321-

1.0.4.00000

retired

cross_vmware-esx-drivers-block-iomemory-vsl_400.2.1.0.241-1.0.4.00000

installed

cross_vmware-esx-drivers-block-iomemory-vsl_400.2.1.0.240-1.0.4.00000

retired

2. Run the following command to remove installed drivers:

esxupdate -b cross_vmware-esx-drivers-block-iomemory-vsl_400.2.1.0.241-

1.0.4.00000 remove

To install the driver on an existing ESX host using esxupdate:

1. Power on the ESX host and log in as administrator.

2. Place the driver CD in the ESX host CD-ROM drive.

3. Mount the driver CD.

4. Navigate to <cd mount point>/offline-bundle.

5. Run the esxupdate command to install drivers using the offline bundle.

$ esxupdate --bundle=offline-bundle.zip --nosigcheck --nodeps --nocache

--maintenancemode update

Installing the IO Accelerator utilities using ESX

1. Copy the downloaded .rpm packages to the ESX host.

2. Enter the following command:

rpm -Uvh fio-*.rpm

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 129 130

Keine Kommentare

Hp PCIe IO Accelerators for ProLiant Servers Bedienungsanleitung Seite 62