Hp PCIe IO Accelerators for ProLiant Servers Bedienungsanleitung PDF herunterladen (Seite 12)

Hardware installation 12

Hardware installation

Installing the HP PCIe IO Accelerator

WARNING: To reduce the risk of personal injury or damage to the equipment, consult the

safety information and user documentation provided with the server before attempting the

installation.

Many servers are capable of providing energy levels that are considered hazardous and are

intended to be serviced only by qualified personnel who have been trained to deal with these

hazards. Do not remove enclosures or attempt to bypass any interlocks that may be provided

for the purpose of removing these hazardous conditions.

CAUTION: Electrostatic discharge might damage electronic components. Be sure that you are

properly grounded (earthed) before beginning any installation procedure.

To install the IO Accelerator:

1. If you are installing the PCIe IO Accelerator in a low-profile system, use the half-height bracket. See

"Installing a half-height bracket (on page 15)."

2. Locate the serial number on your PCIe IO Accelerator and record it.

3. Power off the server, and then disconnect the power cable.

4. Remove the server access panel.

5. Locate an available PCIe slot. For details on removing the panel and identifying PCIe slots, see your

server documentation.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 129 130

Keine Kommentare

Hp PCIe IO Accelerators for ProLiant Servers Bedienungsanleitung Seite 12