HP EliteDesk 800 G4 Tower PC Bedienungsanleitung PDF herunterladen (Seite 59)

Front bezel security

The front bezel can be secured in place by installing a security screw provided by HP. To install the security

screw:

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs and USB ash drives, from the computer.

3. Turn o the computer properly through the operating system, and turn o any external devices.

4. Disconnect the AC power cord from the AC outlet and disconnect any external devices.

IMPORTANT: Regardless of the power-on state, voltage is always present on the system board as long

as the system is plugged into an active AC outlet. To prevent damage to internal components, you must

disconnect the AC power cord from the power source before opening the computer.

5. Remove the computer access panel. See Removing the computer access panel on page 6.

6. Remove the silver 6-32 security screw located on the chassis.

7. Make sure that the front bezel is installed on the chassis.

Installing a security lock 51

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 75 76

Keine Kommentare

HP EliteDesk 800 G4 Tower PC Bedienungsanleitung Seite 59