HP EliteDesk 705 G2 Microtower PC Bedienungsanleitung PDF herunterladen (Seite 83)

Blank screen and the power LED ashes Red six times, once every second, followed by a two second pause, and the computer

beeps six times. (Beeps stop after fth iteration but LEDs continue ashing.)

Cause Solution

Pre-video graphics error. For systems with a graphics card:

1. Reseat the graphics card (if applicable). Power on the

system.

2. Replace the graphics card (if applicable).

3. Replace the system board.

For systems with integrated graphics, replace the system board.

Blank screen and the power LED ashes Red seven times, once every second, followed by a two second pause, and the computer

beeps seven times. (Beeps stop after fth iteration but LEDs continue ashing.)

Cause Solution

System board failure (ROM detected failure prior to video). Replace the system board.

Monitor does not function properly when used with energy saver features.

Cause Solution

Monitor without energy saver capabilities is being used with

energy saver features enabled.

Disable monitor energy saver feature.

Dim characters.

Cause Solution

The brightness and contrast controls are not set properly. Adjust the monitor brightness and contrast controls.

Cables are not properly connected. Check that the graphics cable is securely connected to the

graphics card (if applicable) or video connector and the monitor.

Blurry video or requested resolution cannot be set.

Cause Solution

If the graphics controller was upgraded, the correct graphics

drivers may not be loaded.

Install the video drivers included in the upgrade kit.

Monitor is not capable of displaying requested resolution. Change requested resolution.

Graphics card is bad. Replace the graphics card.

Solving display problems 75

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 140 141

Keine Kommentare

HP EliteDesk 705 G2 Microtower PC Bedienungsanleitung Seite 83