HP Elite Slice for Meeting Rooms Bedienungsanleitung PDF herunterladen (Seite 14)

2 Setup

Connecting or removing modules

Three types of modules may be connected to the Elite Slice: optical drive module, audio module, and VESA

plate. Modules should be attached to the base module in the following order:

●

HP ODD Modules

●

HP Audio Module

●

HP VESA Plate

The optical drive module and the audio module are powered modules. Only one audio module may be

connected to the Elite Slice. Depending on the AC adapter, however, you may be able to connect multiple

optical drive modules.

NOTE: Check the label on the AC adapter to verify the power supplied.

●

A 90 W AC adapter (which ships with the HP Tri-Band Wireless Charging Cover) allows up to four powered

modules to be connected to the Elite Slice:

—

Up to three optical drive modules and one audio module

– or –

—

Up to four optical drive modules (and no audio module)

●

A 65 W AC adapter allows up two powered modules to be connected to the Elite Slice:

—

One optical drive module and one audio module

– or –

—

Up to two optical drive modules (and no audio module)

Connecting modules

CAUTION: Before connecting modules, turn o the Elite Slice and disconnect it from any power source.

Modules cannot be “hot-plugged” or “hot-swapped.”

1. Remove/disengage the security cable, if one is attached.

2. Remove all removable media, such as USB ash drives.

3. Turn o the Elite Slice properly through the operating system, and then turn o any external devices.

8 Chapter 2 Setup

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 34 35

Keine Kommentare

HP Elite Slice for Meeting Rooms Bedienungsanleitung Seite 14