Connecting the cables
NOTE: The display ships with select cables. Not all cables shown in this section are included with the
display.
1. Place the display in a convenient, well-ventilated location near the computer.
2. Before connecting the cables, route the cables through the cable routing hole in the center of the stand.
3. Depending on your conguration, connect either the DisplayPort, HDMI, or USB Type-C cable between
the computer and the display.
NOTE: The video mode is determined by the video cable used. The display will automatically
determine which inputs have valid video signals. The inputs can be selected through the On-Screen
Display (OSD) feature by pressing one of the front bezel buttons to activate the buttons, and then press
the Open Menu button to open the OSD. In the OSD, select Video Input and choose the desired input
source.
IMPORTANT: USB-C input must be manually selected for a video input. Once USB-C is selected for the
video input, auto-scanning of the HDMI and DisplayPort inputs is disabled.
● For DisplayPort digital operation, connect the DisplayPort signal cable to the DisplayPort
connector on the rear of the display and the other end to the DisplayPort connector on the
computer (cable provided).
NOTE: There are two DisplayPort connections on the rear of the display that allow you to connect
two workstations to the display.
Setting up the display 9
Kommentare zu diesen Handbüchern