HP DreamColor Z27x G2 Studio Display Bedienungsanleitung Seite 12
- Seite / 110
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Product features and components
Features
The monitor features the following:
● 68.6 cm (27-inch) diagonal viewable area with 2560×1440 resolution, plus full-screen support for lower
resolutions
● 100% coverage of sRGB and BT.709, 99% coverage of Adobe RGB, 93% coverage of DCI-P3, and 72% of
BT.2020
● LCD (liquid crystal display) with an active matrix, thin-lm transistor (TFT) panel.
● Ability to accurately remap the color gamut of the display (within the supported color gamut of the
panel) to enable the selection of the color space and very accurately set the RGB primaries, white point,
and grayscale response for consistent and repeatable colors
● Very high color and luminance stability (with typical use)
● Calibrated color space factory presets for DCI P3 D65, BT.709, BT.2020, sRGB D65, sRGB D50, Adobe RGB
D65, and Adobe RGB D50 so the display is ready to use for color-critical applications with minimal setup
● Recalibrateable color presets that allow you to recalibrate to a standard or custom color space by
specifying the color primaries, white point, gamma/EOTF, luminance, and name (via StudioCal XML)
● Option to reset to Factory Calibration settings or User Calibration settings to easily restore the display to
the factory or user settings
● Built-in support for the X-Rite i1Display Pro, X-Rite i1 Pro, Klein Instruments K10-A, Photo Research
PR-6xx/7xx, Colorimetry Research CR-250, and Konica Minolta CA-310 measurement devices
● Updatable display rmware to enable HP to quickly and easily provide solutions to identied problems
and provide custom solutions
● Four re-assignable front bezel Function buttons to quickly select the most commonly used operations
● Wide viewing angle to allow viewing from a sitting or standing position, or moving from side-to-side
● Adjustable tilt, height, and swivel capabilities
● Removable stand for exible display panel mounting solutions
● 100 mm integrated VESA mounting
● Two video signal inputs to support DisplayPort digital with one cable provided
● Two video signal inputs to support HDMI digital with one cable provided
● Analog audio output for headphones
● Integrated KVM (Keyboard/Video/Mouse) switch with keyboard-based input switching
● RJ-45 network connector
● Two DreamColor USB ports for connecting a measurement instrument or updating rmware
● Two fast-charging USB 3.0 ports
● USB Type-C port (USB 3.1 Gen1, 5 Gbps) with one USB Type-C cable and one USB Type-C to A cable
● USB 3.0 hub with one upstream port (cable provided) that connects to the computer and four
downstream ports that connect to USB devices
2 Chapter 1 Getting Started
- User Guide 1
- About This Guide 3
- Table of contents 5
- 1 Getting Started 11
- Features 12
- Front panel controls 13
- Rear and side components 14
- Setting up the display 15
- Mounting the display 16
- Installing a security cable 18
- Connecting the cables 19
- Adjusting the display 23
- Turning on the display 24
- Connecting USB devices 25
- Removing the display stand 26
- 2 Using the display 27
- Updating the rmware 28
- Adjusting luminance 30
- Video signal adjustments 31
- Overscan the frame 32
- Show only the blue channel 32
- The “Fill To” options 32
- 2048 × 1080 1.85:1 1998 1080 36
- 2048 × 1080 2.39:1 2048 858 36
- Working with markers 38
- 16:9 aspect ratio markers 39
- 4:3 aspect ratio markers 40
- Crosshair markers 41
- Marker color 41
- Custom markers 41
- Marker element 42
- Marker info element 42
- Marker position element 42
- Marker style element 42
- Custom marker example 43
- Renaming video inputs 44
- Custom video input names 45
- Using the KVM switch 46
- Customizing bezel buttons 47
- User presets 49
- Activating a user preset 51
- Automatic input-based presets 52
- Color settings menu 53
- Video input menu 54
- Image adjustment menu 55
- Split/PIP control menu 57
- Load/save user preset 58
- Calibration 59
- Language menu 60
- Management menu 60
- Menu and message control menu 64
- Auto EDID update 66
- 3 Display calibration 67
- Calibration environment 68
- Calibration frequency 69
- User calibration methods 70
- Menu-driven user calibration 71
- White point 72
- Gamma/EOTF 72
- Luminance 72
- StudioCal XML calibration 73
- Calibration automation 73
- Conguration 77
- Usage guidelines 77
- File name and disk format 81
- Declaration 81
- Comments 81
- Root element 81
- Calibration element 82
- Calibration info element 82
- Core calibration tags 82
- Target_primaries 83
- Core calibration tag examples 84
- ICC prole generation 85
- Optional calibration tags 86
- Validation 87
- Validation results le 88
- Archive LUT 89
- Download LUT 89
- Upload LUT 90
- LUT folder structure 91
- Non-calibration elements 94
- Marker info parent element 96
- 5 Remote management 99
- Setting dashboard security 100
- Navigating the dashboard 102
- Logging out of the dashboard 102
- 6 Support and troubleshooting 103
- Product support 104
- 7 Maintaining the display 105
- A Technical specications 106
- Preset display resolutions 107
- Energy saver feature 108
- Energy saver feature 99 109
- B Accessibility 110
Verwandte Produkte und Handbücher für Nein HP DreamColor Z27x G2 Studio Display
(25 Seiten)
(28 Seiten)
(20 Seiten)
(40 Seiten)
(18 Seiten)
(126 Seiten)
(11 Seiten)
(71 Seiten)
(160 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.633 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern