Hp XP P9500 Storage Bedienungsanleitung PDF herunterladen (Seite 72)

NOTE:

Regarding the specification of the same VSN in volume definition file for 01-XX-48 or later: The same

VSN can be defined in the volume definition file using VSN identification, and both volumes can be

used by FXotm and FXmto. The definitions should be defined with 35 digits, using the alphabetic

(A-Z, @, #, and \) or numeric (0-9) characters.

The -A, -B, and -C Data Exchange volumes and the OPEN-x-FXoto volumes can be defined in the same

Data Exchange volume definition file. For example:

XXX/XXXXXX MVS01 3390-3A

YYY/YYYYYY VSN01 OPEN-3

end

Table 37 Data Exchange Volume Association Parameters

EnterFunctionNameNumber

Character-type device file name (for

example, c1t0d2 for HP-UX,

c1t0d2s1 for Solaris.

NOTE:

For Solaris, HP-UX, and AIX, the

format is different if the link is

with JP1/HiCommand Dynamic

Link Manager. Refer to the

readme for JP1/HiCommand

Dynamic Link Manager.

Specifies the raw device (partition)

name defined for the open-system.

Device file name1

The 6-character volser (for example,

FX45). A volser can use the follow-

ing characters: A-Z, 0-9, @, #, \

Specifies the logical volume defined

for the mainframe.

VOLSER2

Correct LVI/LU for Data Exchange

volume: 3390-3A, -3B, -3C, 3380-

KA, -KB, -KC or OPEN-x-FXoto.

Make sure to define all OPEN-x

FMT volumes in a separate file.

Specifies the LVI or LU type of the

Data Exchange volume.

LVI or LU type (emula-

tion)

Make sure to press Return (Enter

for Windows) at the end of each

line.

Marks the end of the parameter set.Carriage return4

end

Marks the end of the parameter file.End of file5

To create the Data Exchange volume definition file:

1. Open a new empty text file. For UNIX-based systems, use the UNIX vi editor (for example, vi

datasetmount.dat). For Windows systems, use any text editor, and make sure to use plain

text. The file name must be datasetmount.dat (all lowercase), and the file must be located

in the current working directory when you start FCU. If you are creating two Data Exchange

volume definition files, use datasetmount1.dat and datasetmount2.dat, and remove the

1 or 2 from the desired file before starting FCU.

Preparing for Data Exchange Operations72

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 181 182

Kommentare zu diesen Handbüchern

Keine Kommentare

Hp XP P9500 Storage Bedienungsanleitung Seite 72

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Lager Hp XP P9500 Storage