HP Compaq dx2400 Betriebsanweisung PDF herunterladen (Seite 24)

Removing or Installing an Expansion Card

The computer has one standard PCI expansion slot that can accommodate an expansion card up to

17.46 cm (6.875 inches) in length. The computer also has two PCI Express x1 expansion slots and one

PCI Express x16 expansion slot.

Figure 2-8 Expansion Slot Locations

Table 2-2 Expansion Slot Locations

Item Description

1 PCI expansion slot

2 PCI Express x1 expansion slot

3 PCI Express x1 expansion slot

4 PCI Express x16 expansion slot

NOTE: You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16

expansion slot.

To remove, replace, or add an expansion card:

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as diskettes or compact discs, from the computer.

3. Turn off the computer properly through the operating system, then turn off any external devices.

4. Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board as

long as the system is plugged into an active AC outlet. You must disconnect the power cord to

avoid damage to the internal components of the computer.

18 Chapter 2 Hardware Upgrades ENWW

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 58 59

Keine Kommentare

HP Compaq dx2400 Betriebsanweisung Seite 24