HP ZBook 17 G2 Mobile Workstation Bedienungsanleitung PDF herunterladen (Seite 95)

5. Remove the ExpressCard assembly (5) by sliding it up and to the right at an angle.

Reverse this procedure to install the ExpressCard assembly.

Smart Card reader

Description Spare part number

Smart Card reader (includes cable) 742159-001

Before removing the Smart Card reader, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 41).

5. Remove the service cover (see Service cover on page 43).

6. Remove the optical drive (see Optical drive on page 52) or upgrade bay hard drive (see Upgrade Bay

hard drive on page 54).

7. Remove the keyboard (see Keyboard on page 57).

8. Remove the top cover (see Top cover on page 67).

9. Remove the ExpressCard assembly (see ExpressCard assembly on page 82).

Remove the Smart Card:

1. Remove the three Phillips PM2.5×4.0 screws (1) that secure the Smart Card reader to the system board.

2. Lift the Smart Card reader slightly upward and toward the left (2).

Component replacement procedures 83

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 170 171

Keine Kommentare

HP ZBook 17 G2 Mobile Workstation Bedienungsanleitung Seite 95