HP OMEN X - 17-ap020nr Bedienungsanleitung PDF herunterladen (Seite 52)

Before removing the trunk, follow these steps:

1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the computer

on, and then shut it down through the operating system.

2. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then

unplugging the AC adapter from the computer.

3. Disconnect all external devices from the computer.

4. Remove the following components:

a. Base enclosure (see Base enclosure on page 38)

b. Battery (see Battery on page 31)

c. Speakers (see Speakers on page 45)

Remove the trunks:

1. Remove four Phillips screws (1) securing the left and right trunk.

2. Remove the two Phillips screws securing the trunk bottom (2).

3. Remove the trunk (3).

Reverse this procedure to install the trunk.

40 Chapter 6 Removal and replacement procedures for authorized service provider parts

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 90 91

Keine Kommentare

HP OMEN X - 17-ap020nr Bedienungsanleitung Seite 52