HP OMEN X - 17-ap020nr Bedienungsanleitung PDF herunterladen (Seite 66)

Display assembly

Description Spare part number

Antenna, dual 940583-001

Back cover 940584-001

Camera 940626-001

Display bezel 940586-001

Display cable

●

For products with non-touch FHD screen with HD camera, 120 Hz 940593-001

●

For products with non-touch UHD screen with HD camera, 120 Hz 940594-001

Hinge 940603-001

Hinge support bracket 940604-001

Raw panel 43.94 cm (17.3”) (non-touch screen)

●

FHD WLED AntiGlare (1920 x 1080) at-at (4.0 mm) UWVA, eDP1.3 + NVSR, Support NVIDIA G-Sync

120Hz

940614-001

●

UHD WLED AntiGlare (3840 x 2160) at-at (4.0 mm) UWVA, eDP + PSR, Support NVIDIA G-Sync 940615-001

●

FHD LED AntiGlare (1920 x 1080) at-at (4.0 mm) UWVA, eDP + PSR, Support NVIDIA G-Sync L12056-001

IMPORTANT: Make special note of each screw and screw lock size and location during removal

and replacement.

Before removing the display assembly, follow these steps:

1. Shut down the computer.

2. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then

unplugging the AC adapter from the computer.

3. Disconnect all external devices connected to the computer.

4. Remove the following components:

a. Base enclosure (see Base enclosure on page 38)

b. Battery (see Battery on page 31)

c. Speakers (see Speakers on page 45).

d. Remove the fans (see Fan on page 41)

e. Remove the heat sink (see Heat sink with fan on page 42)

f. Remove the system board (see System board on page 47)

Remove the display assembly:

1. Remove the 12 Phillips screws from the hinge.

54 Chapter 6 Removal and replacement procedures for authorized service provider parts

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 90 91

Keine Kommentare

HP OMEN X - 17-ap020nr Bedienungsanleitung Seite 66