Hp ProLiant DL360 G5 Server Bedienungsanleitung Seite 70
- Seite / 118
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Configuration and utilities 70
2.
Access RBSU by pressing the F9 key during power-up when the prompt is displayed in the upper
right corner of the screen.
3. Select System Options.
4. Select Advanced Memory Protection.
5. Select Mirrored Memory with Advanced ECC Support.
6. Press the Enter key.
7. Press the Esc key to exit the current menu or press the F10 key to exit RBSU.
For more information on mirrored memory, refer to the white paper on the HP website
(http://h18000.www1.hp.com/products/servers/technology/memoryprotection.html
).
Array Configuration Utility
ACU is a browser-based utility with the following features:
• Runs as a local application or remote service
• Supports online array capacity expansion, logical drive extension, assignment of online spares, and
RAID or stripe size migration
• Suggests the optimum configuration for an unconfigured system
• Provides different operating modes, enabling faster configuration or greater control over the
configuration options
• Remains available any time that the server is on
• Displays on-screen tips for individual steps of a configuration procedure
For optimum performance, the minimum display settings are 800 × 600 resolution and 256 colors.
Servers running Microsoft® operating systems require Internet Explorer 5.5 (with Service Pack 1) or later.
For Linux servers, refer to the README.TXT file for additional browser and support information.
For more information, refer to the HP Array Configuration Utility User Guide on the Documentation CD or
the HP website (http://www.hp.com
).
Option ROM Configuration for Arrays
Before installing an operating system, you can use the ORCA utility to create the first logical drive, assign
RAID levels, and establish online spare configurations.
The utility also provides support for the following functions:
• Reconfiguring one or more logical drives
• Viewing the current logical drive configuration
• Deleting a logical drive configuration
• Setting the controller to be the boot controller
If you do not use the utility, ORCA will default to the standard configuration.
For more information regarding array controller configuration, refer to the controller user guide.
For more information regarding the default configurations that ORCA uses, refer to the HP ROM-Based
Setup Utility User Guide on the Documentation CD.
HP ProLiant Essentials Rapid Deployment Pack
NOTE: To deploy servers in an existing server blade enclosure, always use the most recent version of RDP
available at the HP website (http://www.hp.com/servers/rdp
).
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- Front panel LEDs and buttons 8
- Rear panel components 9
- Rear panel LEDs and buttons 10
- System board components 11
- System maintenance switch 12
- NMI switch 12
- SAS and SATA device numbers 15
- SAS and SATA hard drive LEDs 16
- Fan locations 17
- Operations 18
- Remove the access panel 20
- Install the access panel 20
- Operations 24 24
- In this section 25
- Rack planning resources 26
- Optimum environment 26
- Temperature requirements 27
- Power requirements 27
- Rack warnings 28
- Installing hardware options 28
- Registering the server 31
- Introduction 32
- Processor option 32
- Memory options 37
- Advanced ECC memory 38
- Installing FBDIMMs 40
- Removing hard drive blanks 41
- Multibay device options 43
- Expansion board options 46
- P400i Controller 50
- Cabling 63
- Cabling 64 64
- Battery pack cabling 65
- Multibay backplane cabling 66
- Configuration and utilities 67
- HP ROM-Based Setup Utility 68
- Boot options 69
- BIOS Serial Console 69
- Configuring mirrored memory 69
- Array Configuration Utility 70
- Management tools 71
- Erase Utility 72
- Management Agents 73
- HP Systems Insight Manager 73
- Redundant ROM support 73
- Diagnostic tools 74
- Array Diagnostic Utility 75
- HP Insight Diagnostics 75
- Integrated Management Log 75
- Keeping the system current 76
- Care Pack 78
- Troubleshooting 79
- Symbols on equipment 80
- Warnings and cautions 80
- Symptom information 81
- Loose connections 82
- Service notifications 82
- Troubleshooting flowcharts 83
- General diagnosis flowchart 84
- Symptoms: 86
- Troubleshooting 88 88
- POST problems flowchart 89
- OS boot problems flowchart 90
- Troubleshooting 92 92
- Possible causes: 93
- Redundancy failure 93
- Troubleshooting 94 94
- System battery 95
- FCC rating label 96
- FCC logo, United States only 97
- Modifications 98
- Japanese notice 99
- BSMI notice 99
- Korean notice 100
- Laser compliance 100
- Battery replacement notice 100
- Electrostatic discharge 102
- Specifications 103
- Technical support 105
- Technical support 106 106
- Customer Self Repair 107
- Reparo feito pelo cliente 109
- Technical support 110 110
- Technical support 111 111
- Technical support 112 112
- Acronyms and abbreviations 113
- Index 116 116
- Index 117 117
- Index 118 118
Verwandte Produkte und Handbücher für Computerhardware Hp ProLiant DL360 G5 Server
(99 Seiten)
(93 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.724 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern