HP ProDesk 400 G4 Base Model Microtower PC Bedienungsanleitung PDF herunterladen (Seite 21)

6. Open both latches of the memory module socket (1), and insert the memory module into the socket (2).

Push the module down into the socket, ensuring that the module is fully inserted and properly seated.

Make sure the latches are in the closed position (3).

NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab

on the memory socket.

For maximum performance, populate the sockets so that the memory capacity is spread as equally as

possible between Channel A and Channel B. See Populating DIMM sockets on page 11.

7. Repeat step 6 to install an additional module.

8. Replace the computer access panel.

9. Reconnect the power cord and any external devices, and then turn on the computer. The computer

should automatically recognize the additional memory.

10. Lock any security devices that were disengaged when the access panel was removed.

Installing additional memory 13

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 50 51

Keine Kommentare

HP ProDesk 400 G4 Base Model Microtower PC Bedienungsanleitung Seite 21