HP EliteDesk 705 G2 Base Model Small Form Factor PC Bedienungsanleitung PDF herunterladen (Seite 39)

8. To install a new expansion card, hold the card just above the expansion socket on the system board then

move the card toward the rear of the chassis (1) so that the bracket on the card is aligned with the open

slot on the rear of the chassis. Press the card straight down into the expansion socket on the system

board (2).

NOTE: When installing an expansion card, press rmly on the card so that the whole connector seats

properly in the expansion card socket.

9. Rotate the slot cover retention latch back in place to secure the expansion card.

10. Connect external cables to the installed card, if needed. Connect internal cables to the system board, if

needed.

11. Replace the computer access panel.

12. If the computer was on a stand, replace the stand.

13. Reconnect the power cord and any external devices, and then turn on the computer.

Expansion card 29

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 152 153

Keine Kommentare

HP EliteDesk 705 G2 Base Model Small Form Factor PC Bedienungsanleitung Seite 39