HP A6828A Bedienungsanleitung PDF herunterladen (Seite 36)

Installing the A6828A Adapter

Connecting External SCSI Peripherals

Chapter 220

Figure 2-1 below is a drawing (not to scale) of a typical SCSI shielded

68-pin LVD cable.

Figure 2-1 SCSI Cable for External Connections

To connect external SCSI devices to the A6828A adapter, perform the

following steps:

Step 1. Plug the 68-pin VHDCI connector on one end of a shielded external high

density SCSI cable into the adapter’s external connector (J2).

Step 2. Plug the 68-pin HD connector on the other end of the cable into the SCSI

connector on the external SCSI device.

Step 3. If you need to connect more than one external SCSI device to the adapter,

daisy chain them together with shielded external SCSI cables.

If auto termination is disabled and you want to terminate the external

connector on the HBA, use SCSI LVD/SE terminator (HP product

number C2370A). For more information on auto termination, see “Auto

Termination” on page 37.

When you have ﬁnished connecting the external devices, go to the next

section, “Specifying SCSI Parameters”.

68-pin HD

68-pin VHDCI

Shielded external High Density 68-pin SCSI LVD cable

(connect to external

SCSI device)

(connect to adapter)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 137 138

Keine Kommentare

HP A6828A Bedienungsanleitung Seite 36