HP L2206tm Bedienungsanleitung

HP Compaq L2206tm and L2206tmp LEDBacklit Touch MonitorsUser Guide

Rear componentsFigure 2-2 Rear componentsComponent Description1 AC power connector Connects the AC power cable to the monitor.2 DisplayPort Connects

Connecting the cables1. Place the monitor in a convenient, well-ventilated location near the computer.2. Remove the cable management clip from the ped

6. Connect one end of the power cord to the AC power connector on the back of the monitor, andconnect the other end to an electrical wall outlet.Figur

Adjusting the monitorNOTE: Your monitor model may look different than the model in the following illustrations.1. Tilt the monitor's panel forwar

3. Pivot the monitor from landscape to portrait orientation viewing to adapt to your application.a. Adjust the monitor to full-height position and til

Front componentsFigure 2-9 Front componentsTable 2-1 Front componentsComponent Description1Menu button Opens, selects from, or exits the OSD menu.2M

Turning on the monitor1. Press the power button on the computer to turn it on.2. Press the power button on the front of the monitor to turn it on.CAUT

Connecting USB devicesUSB connectors are used to connect devices such as a digital camera, USB keyboard, or USB mouse.Two USB connectors are located o

Removing the monitor pedestal baseYou can remove the monitor panel from the pedestal base to install the panel on a wall, swing arm, orother mounting

Mounting the monitorThe monitor panel can be attached to a wall, swing arm, or other mounting fixture.NOTE: This apparatus is intended to be supported

© 2012 Hewlett-Packard DevelopmentCompany, L.P.Microsoft, Windows, and Windows Vistaare either trademarks or registeredtrademarks of Microsoft Corpora

Locating the rating labelsThe rating labels on the monitor provide the spare part number, product number, and serial number.You may need these numbers

3 Operating the touch screenInstalling the touch softwareMicrosoft Windows 7/Vista/XP (plug and play)NOTE: Refer to Connecting the cables on page 5 fo

●Windows XP—Select Start > Control Panel > System, and then select the Hardware tab.Select the Device Manager button. If the driver is installed

Using the touch functionNOTE: Before using the touch function, make sure the USB cable is connected and the Windowsoperating system is started.NOTE: W

3. Select the View by drop-down list, and then select either Large icons or Small icons.4. Select the Tablet PC Settings control panel.NOTE: The Table

6. Select the Calibrate… button.Figure 3-4 Calibrate the display7. Repeat steps 5 and 6 for the second monitor.NOTE: If you have two monitors that ar

Tips and troubleshootingTips●WARNING! Keep the display away from any heat sources, such as electric radiators, naturalgas pipes, or direct sunlight. A

Touch screen troubleshootingNOTE: For general troubleshooting information, refer to the HP LCD Monitors Reference Guideincluded on the disc with your

4 Finding more informationRefer to the HP LCD Monitors Reference Guide included on the disc with your monitor for additionalinformation on:●Optimizing

A Technical specificationsNOTE: All specifications represent the typical specifications provided by HP's componentmanufacturers; actual performan

About this guideThis guide provides information on setting up the monitor, operating the touch screen, troubleshooting,and technical specifications.WA

Table A-1 L2206tm/L2206tmp specifications (continued)Environmental requirements:Temperature (operating)Temperature (non-operating)Humidity (operating

Recognizing preset display resolutionsThe display resolutions listed below are the most commonly used modes and are set as factory defaults.This monit

Entering user modesThe video controller signal may occasionally call for a mode that is not preset if:●You are not using a standard graphics adapter.●

B LCD monitor quality and pixelpolicyThe TFT monitor uses high-precision technology that is manufactured according to HP standards toguarantee trouble

iv About this guide

Table of contents1 Product features ... 1

vi

1 Product featuresHP LCD Touch MonitorsThe LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) panel. Themonitor m

●Passive stylus docked in rear enclosure●HDCP copy protection on DVI and DisplayPort inputs●Software and documentation disc that includes monitor driv

2 Setting up the monitorTo set up the monitor, ensure that the power is turned off to the monitor, computer system, and otherattached devices, and the