Hp StorageWorks XP Remote Web Console Software Bedienungsanleitung PDF herunterladen (Seite 203)

Path Status

Description Corrective Action

Resource

Shortage (Port)

or,

Resource

Shortage

(Pair-Port)

The local and remote storage

system rejected the request

for creating a logical path

because all resources in the

local and remote storage

systemsare beingusedfor

other connections.

Delete the failed path, and also delete all paths and

remote storage systems not currently in use. The local

storage system can be connected to up to 64 remote

storage systems with up to eight paths to each remote

storage system.

Make sure all local and remote storage system ports

are properly conﬁgured: ordinary target ports or RCU

target ports for hosts, RCU target ports for remote storage

systems, initiator ports for local storage systems.

If necessary, connect to the remote storage system to delete

paths or remote storage systems and reconﬁgure ports,

then reconnect to the local storage system. After that, add

thepathorthe remote storagesystem again by usingthe

Add Path window or the Add DKC window.

Serial Num

ber

Mismatch

The serial number (S/N) of

theremotestorage system

does not m

atch the speciﬁed

serial nu

mber (S/N).

Make sure t

hatyou entered the correctremotestorage

system S/N and path parameters (e.g., local storage

system port, remote storage system port, and controller ID).

After th

at, delete the failed path. You may need to change

the mini

mum paths setting or delete the remote storage

system in order to delete the path. After deletion ﬁnishes,

add the path and the remote storage system again by

using the Add Path window or the Add DKC window.

Make sure that you entered the correct controller ID, and

also make sure that the topology settings of the local and

remote storage system ports are correct.

Invalid Port

The speciﬁed port is not

conﬁgured as an RCP or

initiator port, or this path

already exists.

Make sure that the topology settings of the local and

remote storage system ports are correct.

Make sure that you entered the correct remote storage

system S/N and path parameters (e.g., local storage

system port, remote storage system port, and controller ID).

After that, delete the failed path. You may need to change

the minimum paths setting or delete the remote storage

system in order to delete the path. After deletion ﬁnishes,

add the path and the remote storage system again by

using the Add Path window and the Add DKC window.

<blank> This path was not

established.

Delete the failed path. You may need to change the

minimum paths setting or delete the remote storage system

in order to delete the path. After deletion ﬁnishes, add the

path and the remote storage system again by using the

Add Path window and the Add DKC window.

air-Port Number

ismatch

The speciﬁed port in the

remote storage system is

hysically disconnected from

the local storage system.

Make sure that you speciﬁed the correct remote storage

ystem port. Correct the port number if necessary.

ake sure that the local storage system port and the

emote storage system port are connected via cables to

each other. If the storage systems are not connected via

cables, please connect them via cables and then retry the

operation.

Make sure that the topology settings of ports on the local

and remote storage systems are correct.

Pair-Port Type

Mismatch

The speciﬁed port in the

remote storage system is not

conﬁgured as an RCU Target

port.

Make sure that the speciﬁed port in the remote storage

system is conﬁgured as an RCU target port. Conﬁgure the

port as an RCU target port if it is not conﬁgured that way.

Communication

Failed.

Thelocal storagesystem

is connected to the remote

storage system successfully,

but logical communication

timeout occurred.

Make sure that the remote storage system port and network

relay devices (e.g., cables and switches) are properly

conﬁgured and functioning.

Hitachi Universal Replicator for z/OS user guide for XP12000/XP10000 Disk Arrays and SVS 200

203

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 218 219

Kommentare zu diesen Handbüchern

Keine Kommentare

Hp StorageWorks XP Remote Web Console Software Bedienungsanleitung Seite 203

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Lager Hp StorageWorks XP Remote Web Console Software