Hp StorageWorks 2.32 Edge Switch Bedienungsanleitung PDF herunterladen (Seite 98)

Configuring the switch98

• Non-SANtegrity II compatible switches

• Non-manageable switches

• Non-HP switches

• JBOD

• HBA

• Other storage devices

When your HAFM appliance is installed with SANtegrity and you discover a secure or unsecure

fabric, the E_port authentication is disabled, and the drop-down menus for port authentication

display your HAFM appliance. If a device is SANtegrity capable, your HAFM appliance can

discover its current security settings and display them on the table. If not, your HAFM appliance

displays only a limited information about that device.

The Authenticated Devices list displays a list of authenticated devices that are in the current switch

local database. In this database, there are connected or detached devices. Devices listed in this

table must have a CHAP secret.

Add an attached or detached device from the left Port Authentication List table by selecting a device

and clicking the right arrow button, double-clicking the device, or clicking Add. Change the CHAP

secret of a device by selecting the device and clicking Edit. To remove devices from this list, select a

device or multiple devices, and click Remove.

NOTE: If the device is involved with the authentication process and the device is removed, the

connectivity breaks.

Adding a detached switch

To add a detached switch, do the following:

1. Click Add.

The Add Device dialog box is displayed (Figure 31).

To add a device that is not discovered by the HAFM appliance, a device that is not physically

connected, or a device that is discovered, but not directly attached to this current switch:

Figure 31 Add Device dialog box

2. Type the Node Name.

• If Node Name is already in the Authenticated Devices list or is invalid, the new entry is

rejected.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 227 228

Keine Kommentare

Hp StorageWorks 2.32 Edge Switch Bedienungsanleitung Seite 98