Hp StorageWorks 2.12 Edge Switch Bedienungsanleitung PDF herunterladen (Seite 168)

Using Maintenance Features

168 Edge Switch Element Manager User Guide

Backup and Restore Configuration

Click Maintenance > Backup & Restore Configuration to save the product

configuration stored on the switch to the HAFM appliance hard disk or to restore

the product configuration from the HAFM appliance. Only a single copy of the

configuration is kept on the HAFM appliance.

Backup is primarily for single-CTP systems, such as the Edge Switch 2/24, where

a backup is needed to restore to a replacement CTP card. You can also use this

feature for a special purpose configuration or for temporary testing of a

configuration. You cannot modify the location and file name of the saved

configuration.

Note: You can only restore the configuration to a switch with the same IP address.

Note: For the optional SANtegrity Binding feature, Backup and Restore Configuration

will backup and restore Switch Binding information, but will not back up and restore

Fabric Binding and Enterprise Fabric Mode information.

Backup Procedure

Use the following procedure to back up your product configuration:

1. Click Maintenance > Backup & Restore Configuration to display the

Backup and Restore Configuration dialog box.

The Backup and Restore dialog box consists of a short description of the

features performed when you click Backup or Restore.

Following is a list of configurations that are backed up to the HAFM

appliance:

■ Identification data (switch name, description, and location).

■ Port configuration data (port names, blocked states, and extended distance

settings).

■ Operating parameters for fabric (E_D_TOV, R_A_TOV, switch priority,

interop mode) and for switch (preferred domain ID, rerouting delay, and

domain RSCNs).

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 245 246

Keine Kommentare

Hp StorageWorks 2.12 Edge Switch Bedienungsanleitung Seite 168