HP XP20000 Bedienungsanleitung PDF herunterladen (Seite 78)

5. Make the settings to all the LDEVs in the LDKC:CU:LDEV column (repeat step 2 through step

4).

6. Click OK.

The specified numbers are assigned to the LDEVs. However, the Add Volume dialog box shows

only the LDEV number assigned for the first LDEV of each external volume.

Figure 30 Example of LDEV Mapping (Manual) Dialog Box

You can also assign contiguous LDEV numbers to LDEVs using this dialog box. To assign contiguous

LDEV numbers to LDEVs, select multiple LDEVs at step 2, and specify the starting LDEV number at

step 3 and 4. You can set Interval if necessary.

Setting the Cross-subsystem Paths

You need to configure the cross-subsystem path from the internal volume to the external volume

before using the external volume mapped as an internal volume. For details on the cross-subsystem

path, see “Cross-subsystem Paths” (page 18).

You can configure the cross-subsystem path when you map the external volume as the internal

volume. You can also add or change the cross-subsystem paths after the mapping operation is

78 Performing XP External Storage Operations

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 169 170

Keine Kommentare

HP XP20000 Bedienungsanleitung Seite 78