HP tc4400 Betriebsanweisung PDF herunterladen (Seite 29)

3–2 Reference Guide

Embedded Security for ProtectTools

The TPM embedded security chip enhances and enables other

ProtectTools Security Manager security features. For example,

Credential Manager for ProtectTools can use the embedded chip

as an authentication factor when the user logs on to Windows.

On select models, the TPM embedded security chip also enables

enhanced BIOS security features accessed through BIOS

Configuration for ProtectTools.

Setup Procedures

CAUTION: To reduce security risk, it is highly recommended that your

IT administrator immediately initialize the embedded security chip.

Failure to initialize the embedded security chip could result in an

unauthorized user, a computer worm, or a virus taking ownership of the

computer and gaining control over the owner tasks, such as handling

the emergency recovery archive, and configuring user access settings.

Follow the steps in the following 2 sections to enable and

initialize the embedded security chip.

Enabling the Embedded Security Chip

The embedded security chip must be enabled in the Computer

Setup utility. This procedure cannot be performed in BIOS

Configuration for ProtectTools.

To enable the embedded security chip:

1. Open Computer Setup by turning on or restarting the

computer, and then pressing

f10 while the “F10 = ROM

Based Setup” message is displayed in the lower-left corner

of the screen.

2. If you have not set an administrator password, use the arrow

keys to select Security > Administrator password, and then

press

enter.

3. Type your password in the New password and Verify new

password boxes, and then press

f10.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 85 86

Keine Kommentare

HP tc4400 Betriebsanweisung Seite 29