Hp SmartStart-Software Bedienungsanleitung PDF herunterladen (Seite 7)

Introduction 7

IMPORTANT: The HP Smart Update Manager does not support cross-platform deployments

(for example, deployments from Linux systems to Windows® systems).

Supported firmware

Firmware type Supported by HP Smart Update Firmware DVD

System ROM Yes

iLO 2 firmware Yes, local and remote

Broadcom NIC firmware Yes

Intel NIC firmware No

NetXen NIC firmware Yes

Power PIC firmware Yes

Smart Array controller firmware Yes

SAS and SATA hard drive firmware behind Smart

Array controllers

Yes

SAS and SATA hard drive firmware behind non-

Smart Array controllers

Emulex, QLogic, and Brocade Fibre Channel Host

Bus Adapter firmware

Yes, offline only

Direct attach tape drive firmware Yes

Tape blade firmware support Yes

Onboard Administrator firmware Yes, online only

Virtual Connect firmware Yes, online only

HP 3Gb SAS BL Switch firmware*** No

Lights-Out 100 firmware Yes

**The only method of flashing the MDS600 firmware in a blade environment is through the Virtual SAS

Manager software.

***The HP 3Gb SAS BL Switch firmware can only be updated by uploading a bin file through the VSM

product. This firmware is currently delivered as a binary image file on the HP website and must be

downloaded and manually upgraded.

Because firmware might be able to update only in online or offline mode for some components, you might

need to execute the Smart Update Firmware DVD both online and offline to update all the firmware in an

enclosure.

1 2 3 4 5 6 7 8 9 10 11 12 ... 51 52

Keine Kommentare

Hp SmartStart-Software Bedienungsanleitung Seite 7