HP PROCURVE 2520 Bedienungsanleitung PDF herunterladen (Seite 361)

100

101

Configuring for Network Management Applications

LLDP (Link-Layer Discovery Protocol)

The Management Address field displays only

the LLDP-configurable IP addresses on the

switch. (Only manually-configured IP

addresses are LLDP-configurable.) If the

switch has only an IP address from a DHCP or

Bootp server, then the Management Address

field is empty (because there are no LLDP-

configurable IP addresses available). For more

on this topic, refer to “Remote Management

Address” on page 13-40.

Figure 13-19. Example of Displaying the Global and Per-Port Information Available for Outbound

Advertisements

Figure 13-20. Example of the Default Per-Port Information Content for Ports 1 and 2

Displaying the Current Port Speed and Duplex Configuration on a

Switch Port. Port speed and duplex information for a switch port and a

connected LLDP-MED endpoint can be compared for configuration

mismatches by using an SNMP application. You can also use the switch CLI

to display this information, if necessary. The following two commands provide

methods for displaying speed and duplex information for switch ports. For

13-69

1 2 ... 356 357 358 359 360 361 362 363 364 365 366 ... 543 544

Kommentare zu diesen Handbüchern

Keine Kommentare

HP PROCURVE 2520 Bedienungsanleitung Seite 361

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software HP PROCURVE 2520