HP ProLiant DL140 Installationsanleitung PDF herunterladen (Seite 57)

HP ProLiant DL140 Server Setup and Installation Guide 49

Table C-4: BIOS Beep Codes

Note: The descriptions of BIOS Beep Codes refer to Chapter 5.

Number of Beeps Troubleshooting Action

1, 2 or 3 Reseat the memory, or replace with known good modules.

4-7, 9-11 Fatal error indicating a serious problem with the system.

Remove add-in card to eliminate the possibility of interference.

‧ If the beep codes are generated even when all other expansion cards are

absent, the motherboard has a serious problem.

‧ If the beep codes are not generated when all other expansion cards are

absent, one of the add-in cards is causing the malfunction. Insert the cards back

into the system one at a time until the problem happens again. This will reveal

the malfunctioning add-in card.

8 If the system video adapter is an add-in card, replace or reseat the video

adapter. If the video adapter is an integrated part of the system board, the board

may be faulty.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 63 64

Keine Kommentare

HP ProLiant DL140 Installationsanleitung Seite 57