HP DL380 Installationsanleitung PDF herunterladen (Seite 31)

Using the Remote desktop method

To connec t the storage server to a network using t he remote desktop

method

1. On the PC client, select Start > Run.AtOpen,typemstsc,thenclick

OK.

2. Enter the serial number of the storage server followed by a hyphen (-) in

the Computer box and click Connect. For example: D4059ABC3433-.

NOTE:

If you are able to determine the IP address from your

DHCP server, you ca n substitute the IP address for the

serial number and hyphen (-). For example: 192.100.0.1.

3. Log in to the HP ProLiant Data Protection Storage Server with th e

default user name administrator and the password hpinvent.

The HP ProLiant Data Protection Storage Server Management console

and Rapid Startup Wizard will start automatically.

NOTE:

You can change the administrator name and password

when you conﬁgure the server using the "Rapid Startup

Wiz ard" on page 38.

4. To complete network conﬁguration using the Rapid Startup Wizard,

see "Conﬁguring the server on the network"onpage35.

Using the Integrated Lights-Out 2 method

The HP iLO 2 management processor provides multiple ways to conﬁgure,

update, operate, and m anage servers remotely. The HP ProLiant Data

Protection Storage Server comes preconﬁgured with iLO 2 default factory

settings, including a default user account and password. These settings

can be found on the iLO 2 Default Network Settings tag found on the front

of the server. If iLO 2 is connected to a network running DNS and DHCP,

you can use it immediately without changing any settings.

For more information on using HP iLO 2, see the HP Integrated Lights-Out 2

User Guide.

HPProLiantDL380G5DataProtectionStorageServer 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Keine Kommentare

HP DL380 Installationsanleitung Seite 31