
Component identification 7
Drive drawer open alarm
Slow beep (every 5 seconds)—The drive drawer is open, and drives are not fully protected by system air
flow.
Fast beep (every 0.5 seconds)—Close the drive drawer immediately to avoid drive damage or data loss and
storage blade shutdown.
The Health status LED bar turns green when drives return to normal operating temperature.
Drive LED definitions
Item LED Status Definition
1
Locate Solid blue The drive is being identified by a host application.
Flashing blue The drive carrier firmware is being updated or requires an update.
2
Activity ring Rotating green Drive activity
3
Do not remove Solid white Do not remove the drive. Removing the drive causes one or more of
the logical drives to fail.
Off Removing the drive does not cause a logical drive to fail.
4
Drive status Solid green The drive is a member of one or more logical drives.
Flashing green The drive is rebuilding or performing a RAID migration, stripe size
migration, capacity expansion, or logical drive extension, or is
erasing.
Flashing
amber/green
The drive is a member of one or more logical drives and predicts
the drive will fail.
Flashing amber The drive is not configured and predicts the drive will fail.
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller.
Kommentare zu diesen Handbüchern